Abstract

Counterfeit medicines are a growing threat to public health across the world and screening methods are needed to allow their rapid identification. A counterfeiter must duplicate both the physical characteristics and the chemical content of a proprietary product to avoid it being detected as a counterfeit product and this is almost impossible to get right. Counterfeit proprietary medicines are, therefore, relatively easy to identify by near infrared (NIR) spectroscopy which can detect physical as well as chemical differences between products by simple spectral comparison. Identifying generic products is more difficult as they use different excipients in the tablet or capsule matrix. Nevertheless, using appropriate models and a large library, NIR spectroscopy can detect counterfeit generic versions. Detecting sub-standard proprietary medicines can be carried out with NIR spectroscopy models and the most widely used is partial least squares regression (PLSR). General rules for generating accurate quantitative models are easy to describe. Quantifying the active pharmaceutical ingredient (API) in generic products can also be carried out using PLSR models with calibration samples generated by manufacturing laboratory samples or by collecting many generic versions of a medicine so as to obtain a good range of the API content in tablets and capsules. Using hand-held instruments or mobile laboratories allows NIR spectrometers to be taken to places where analyses may be made quickly, rather than taking the samples to a laboratory. This has the enormous advantage that the screening of large numbers of samples may be made in pharmacies and wholesalers. Imaging can bring a whole new dimension to NIR spectroscopy to allow the identification of the API and individual excipients as well as measuring the particle sizes of components and giving a measure of the homogeneity of the matrix. The effect of water on potential misidentifications may be obviated by only using blister-packed samples, having large spectral libraries subjected to different humidities or omitting the spectral region where water absorbs.

© 2010 IM Publications LLP

Comprehensive study of solid pharmaceutical tablets in visible, near infrared (NIR), and longwave infrared (LWIR) spectral regions using a rapid simultaneous ultraviolet/visible/NIR (UVN) + LWIR laser-induced breakdown spectroscopy linear arrays detection system and a fast acousto-optic tunable filter NIR spectrometer

Clayton S.C Yang, Feng Jin, Siva R. Swaminathan, Sita Patel, Evan D. Ramer, Sudhir B. Trivedi, Ei E. Brown, Uwe Hommerich, and Alan C. Samuels
Opt. Express 25(22) 26885-26897 (2017)

Optical system for tablet variety discrimination using visible/near-infrared spectroscopy

Yongni Shao, Yong He, and Xingyue Hu
Appl. Opt. 46(34) 8379-8384 (2007)

Pattern recognition of visible and near-infrared spectroscopy from bayberry juice by use of partial least squares and a backpropagation neural network

Haiyan Cen, Yidan Bao, and Yong He
Appl. Opt. 45(29) 7679-7683 (2006)

Detection of counterfeit U.S. paper money using intrinsic fluorescence lifetime

Thomas H. Chia and Michael J. Levene
Opt. Express 17(24) 22054-22061 (2009)

Fast discrimination of traditional Chinese medicine according to geographical origins with FTIR spectroscopy and advanced pattern recognition techniques

Ning Li, Yan Wang, and Kexin Xu
Opt. Express 14(17) 7630-7635 (2006)