Abstract
A XeCl excimer laser (20 ns, 25 mJ) was focused on glass samples containing high concentrations of Li and K (10%, 15%, and 20%) in a surrounding gas of air and He. Plasma characteristics are compared in two cases: at 1 atm and at reduced pressure (1-10 Torr). It is shown that the plasma produced at 1 atm cannot be applied to the elemental analysis of solid samples because of strong background emission and self-absorption in the plasma. The spectrum width of the emission line is very wide due to strong interaction in the plasma. In contrast to this, the shock-wave-induced plasma produced at reduced pressure gives a high S/B (ratio of the intensity of the emission line to that of the background) in the measurement of analytical emission lines, and the slope of the calibration curve is near unity in a log-log plot, thus making it possible for emission spectrochemical analysis.
PDF Article
More Like This
Practical and highly sensitive elemental analysis for aqueous samples containing metal impurities employing electrodeposition on indium-tin oxide film samples and laser-induced shock wave plasma in low-pressure helium gas
Koo Hendrik Kurniawan, Marincan Pardede, Rinda Hedwig, Syahrun Nur Abdulmadjid, Kurnia Lahna, Nasrullah Idris, Eric Jobiliong, Hery Suyanto, Maria Margaretha Suliyanti, May On Tjia, Tjung Jie Lie, Zener Sukra Lie, Davy Putra Kurniawan, and Kiichiro Kagawa
Appl. Opt. 54(25) 7592-7597 (2015)
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription