Abstract
Proper conditioning of the hollow cathode by sputtering is critical to the analytical performance of the hollow cathode. A pulsed discharge procedure was developed to condition the 1.5- × 5-mm stainless steel cathode. A scanning electron microscope was used to study the surface structure resulting from the conditioning. The resulting hollow bottom was bulb-shaped and the surface was mirror-like, very smooth, and shiny. The emission intensities from smooth cathodes were greater that those from the rough ones. The precision obtained here was 3-5% for Na, 5-8% for Li, and 4-10% for K. Three working curves for each element were made on different days with different cathodes that had been conditioned in the same manner for 4 h by sputtering. The three working curves virtually coincided when plotted in the same figure, demonstrating the precision and reproducibility from day to day of the hollow cathode discharge method as developed in this laboratory. The 3-σ detection limits calculated from slopes of working curves are 0.32 pg, 0.35 pg, and 3.2 pg for Na, Li, and K, respectively.
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription