Abstract
A multichannel photodiode-array spectrometer was used to monitor the transient multielement atomic-emission signal generated by an inductively coupled plasma utilizing flow-injection sample introduction. The linearity, dynamic range, sensitivity, and precision of the technique were assessed for three different sample-loop volumes (110, 290, and 500 μL). With a fixed, optimized integration time, a linear dynamic range of 3.5 orders of magnitude was established for five elements—Cd, Cr, Cu, Mg, and Zn—when the 290- and 500-μL sample loops were used. Because the lateral dispersion of the transient sample plug was low and because efforts were made to optimize the signal-to-background ratio by synchronizing the integration period of the photodiode-array detector with the transient signal, detection limits for the flow-injection system were comparable with those obtained with the use of continuous-nebulization sample introduction. An interface is described which enables temporal synchronization of the transient flow-injection signal with the signal integration period of the photodiode array.
PDF Article
More Like This
Multielemental analysis of prehistoric animal teeth by laser-induced breakdown spectroscopy and laser ablation inductively coupled plasma mass spectrometry
Michaela Galiová, Jozef Kaiser, Francisco J. Fortes, Karel Novotný, Radomír Malina, Lubomír Prokeš, Aleš Hrdlička, Tomáš Vaculovič, Miriam Nývltová Fišáková, Jiří Svoboda, Viktor Kanický, and Javier J. Laserna
Appl. Opt. 49(13) C191-C199 (2010)
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription