Practical depolarization-ratio-based inversion procedure: lidar measurements of the Eyjafjallaj&#xF6;kull ash cloud over the Netherlands: erratum

D. P. Donovan; A. Apituley

doi:10.1364/AO.52.004062

Abstract

In a previous publication [Appl. Opt. 52, 2394 (2013)], incorrect expressions appeared in the Appendix A. These errors are corrected here.

The following errors appeared in Appendix A of [1]. These errors are listed and corrected below.

1. A typo appeared in the published version of Eq. (A1). The “10” should, in fact, be a “1.0.”
2. A term is missing in the published version Eq. (A6). The equation should be $δ_{t, o} = \frac{P_{⊥}}{P_{∥}} C_{r}^{- 1} .$
3. Equation (A7) is incorrect. The correct expression is $P_{t} = C_{∥} (i_{∥} + i_{⊥}) = P_{∥, o} + C_{r}^{- 1} P_{⊥, o} .$

These errors have no bearing on the results shown in the rest of the paper.

Reference

1. D. P. Donovan and A. Apituley, “Practical depolarization-ratio-based inversion procedure: lidar measurements of the Eyjafjallajökull ash cloud over the Netherlands,” Appl. Opt. 52, 2394–2415 (2013). [CrossRef]

Previous Article Next Article

Cited By

Optica participates in Crossref's Cited-By Linking service. Citing articles from Optica Publishing Group journals and other participating publishers are listed here.

Alert me when this article is cited.

Equations (2)

Equations on this page are rendered with MathJax. Learn more.

δ_{t, o} = \frac{P_{⊥}}{P_{∥}} C_{r}^{- 1} .

P_{t} = C_{∥} (i_{∥} + i_{⊥}) = P_{∥, o} + C_{r}^{- 1} P_{⊥, o} .

Practical depolarization-ratio-based inversion procedure: lidar measurements of the Eyjafjallajökull ash cloud over the Netherlands: erratum

Abstract

Reference

Cited By

Equations (2)

Applied Optics