Abstract
In this paper, a phase error compensation method based on a probability distribution function (PDF) is proposed to improve the accuracy of phase extraction, which is helpful for three-dimensional (3D) reconstruction. First, the relationship between the gamma and the gray values is established to segment the projection regions. Then a new method based on a PDF is designed to represent the variation degree of phase error, which fits the precoded gamma value in the minimum range of the phase error. After that, the error compensation method is applied to the self-built system and packaged independently from the 3D reconstruction system to unwrap phases with high precision. The experimental results show that the proposed method can reduce the standard deviation of the phase error by 46.9% compared without phase error compensation, and decrease the standard deviation of the phase error by 30% compared with the whole precoding. Generally, our method can effectively avoid overcompensation or under-compensation caused by single global gamma precoding correction, and better reduce the phase error and improve the 3D reconstruction accuracy in the fringe projection system.
© 2023 Optica Publishing Group
Full Article | PDF ArticleMore Like This
Xin Yu, Yuankun Liu, Ningyi Liu, Min Fan, and Xianyu Su
Opt. Express 27(22) 32047-32057 (2019)
Shaoyan Gai, Feipeng Da, and Chao Liu
Appl. Opt. 57(35) 10290-10299 (2018)
Xinyuan Cao, Jinyue Liu, Xiaohui Jia, Yunhuang Liu, and Tiejun Li
Appl. Opt. 62(28) 7447-7454 (2023)