Abstract
Thermal effects in optical substrates are vitally important in determining laser damage resistance in long-pulse and continuous-wave laser systems. Thermal deformation waves in a soda-lime-silica glass substrate have been measured using high-speed interferometry during a series of laser pulses incident on the surface. Two-dimensional images of the thermal waves were captured at a rate of up to six frames per thermal event using a quantitative phase measurement method. The system comprised a Mach–Zehnder interferometer, along with a high-speed camera capable of up to 20,000 frames-per-second. The sample was placed in the interferometer and irradiated with 100 ns, 2 kHz -switched pulses from a high-power Nd:YAG laser operating at 1064 nm. Phase measurements were converted to temperature using known values of thermal expansion and temperature-dependent refractive index for glass. The thermal decay at the center of the thermal wave was fit to a function derived from first principles with excellent agreement. Additionally, the spread of the thermal distribution over time was fit to the same function. Both the temporal decay fit and the spatial fit produced a thermal diffusivity of .
© 2015 Optical Society of America
Full Article | PDF ArticleMore Like This
Srivathsan Vasudevan, George C. K. Chen, Zhiping Lin, and Beng Koon Ng
Appl. Opt. 54(14) 4478-4484 (2015)
Eita Shoji, Atsuki Komiya, Junnosuke Okajima, Hiroshi Kawamura, and Shigenao Maruyama
Appl. Opt. 54(20) 6297-6304 (2015)
Andrew J. Moore, Duncan P. Hand, Jim S. Barton, and Julian D. C. Jones
Appl. Opt. 38(7) 1159-1162 (1999)