Abstract
The most expensive aspects in producing high quality miniature optical systems are the component costs and long assembly process. A new approach for fabricating these systems that reduces both aspects through the implementation of self-aligning LIGA (German acronym for lithographie, galvanoformung, abformung, or x-ray lithography, electroplating, and molding) optomechanics with high volume plastic injection molded and off-the-shelf glass optics is presented. This zero alignment strategy has been incorporated into a miniature high numerical aperture () microscope objective for a fiber confocal reflectance microscope. Tight alignment tolerances of less than 10 μm are maintained for all components that reside inside of a small 9 gauge diameter hypodermic tubing. A prototype system has been tested using the slanted edge modulation transfer function technique and demonstrated to have a Strehl ratio of 0.71. This universal technology is now being developed for smaller, needle-sized imaging systems and other portable point-of-care diagnostic instruments.
© 2009 Optical Society of America
Full Article | PDF ArticleMore Like This
Matthew D. Chidley, Kristen D. Carlson, Rebecca R. Richards-Kortum, and Michael R. Descour
Appl. Opt. 45(11) 2545-2554 (2006)
Robert T. Kester, Tomasz S. Tkaczyk, Michael R. Descour, Todd Christenson, and Rebecca Richards-Kortum
Opt. Express 15(5) 2409-2420 (2007)
K.-H. Brenner, M. Kufner, S. Kufner, J. Moisel, A. Müller, S. Sinzinger, M. Testorf, J. Göttert, and J. Mohr
Appl. Opt. 32(32) 6464-6469 (1993)